[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: xfsdump...
Not a lot to go on, since when it died, it appears to have shutdown
the root file system.
Dec 30 18:47:46 ishtar kernel: xfs_inotobp: xfs_imap() returned an error 22 on
sd(8,3). Returning error.
Dec 30 18:47:46 ishtar kernel: xfs_iunlink_remove: xfs_inotobp() returned an
error 22 on sd(8,3). Returning error.
Dec 30 18:47:46 ishtar kernel: klogd 1.4.1, ---------- state change ----------
Dec 30 18:47:46 ishtar kernel: Inspecting /boot/System.map-2.4.20-xfs
Dec 30 18:47:46 ishtar kernel: Loaded 22282 symbols from
/boot/System.map-2.4.20-xfs.
Dec 30 18:47:46 ishtar kernel: Symbols match kernel version 2.4.20.
Dec 30 18:47:46 ishtar kernel: Loaded 6 symbols from 1 module.
Dec 30 18:47:46 ishtar kernel: xfs_inactive: xfs_ifree() returned an error =
22 on sd(8,3)
Dec 30 18:47:46 ishtar kernel: xfs_force_shutdown(sd(8,3),0x1) called from line
1835 of file xfs_vnodeops.c. Return address = 0xc021370a
Dec 30 18:47:46 ishtar kernel: Filesystem "sd(8,3)": I/O Error Detected.
Shutting down filesystem: sd(8,3)
Dec 30 18:47:46 ishtar kernel: Please umount the filesystem, and rectify the
problem(s)
Dec 30 18:48:38 ishtar xinetd[11572]: warning: cannot open /etc/hosts.allow:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11572]: warning: cannot open /etc/hosts.deny:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11572]: execv( /usr/sbin/imapds ) failed:
Input/output error (errno = 5)
Dec 30 18:48:38 ishtar xinetd[11573]: warning: cannot open /etc/hosts.allow:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11573]: warning: cannot open /etc/hosts.deny:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11573]: execv( /usr/sbin/imapds ) failed:
Input/output error (errno = 5)
Dec 30 18:48:38 ishtar xinetd[11574]: warning: cannot open /etc/hosts.allow:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11574]: warning: cannot open /etc/hosts.deny:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11574]: execv( /usr/sbin/imapds ) failed:
Input/output error (errno = 5)
Dec 30 18:48:38 ishtar xinetd[11575]: warning: cannot open /etc/hosts.allow:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11575]: warning: cannot open /etc/hosts.deny:
Input/output error
Dec 30 18:48:38 ishtar xinetd[11575]: execv( /usr/sbin/imapds ) failed:
Input/output error (errno = 5)
Dec 30 18:49:43 ishtar named-xfer[11434]: [198.41.0.10] not authoritative for
GOV, SOA query got rcode 0, aa 0, ancount 0, aucount 9
Dec 30 18:49:52 ishtar named-xfer[11434]: [193.0.14.129] not authoritative for
GOV, SOA query got rcode 0, aa 0, ancount 0, aucount 9
Dec 30 18:50:00 ishtar /USR/SBIN/CRON[11582]: (root) CMD ( /usr/lib/sa/sa1
)
Dec 30 18:57:31 ishtar syslogd 1.4.1: restart (remote reception).
Here's dmesg after it comes back up:
Linux ishtar 2.4.20-xfs #1 SMP Sun Dec 29 08:25:19 PST 2002 i686 unknown
ishtar:/var/log> dmesg
BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
hm, page 000fe000 reserved twice.
hm, page 000ff000 reserved twice.
hm, page 000f0000 reserved twice.
On node 0 totalpages: 262142
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32766 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: WS 410 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: auto BOOT_IMAGE=2420-xfs ro root=803 vga=0x0303
Initializing CPU#0
Detected 994.885 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 1031304k/1048568k available (2508k kernel code, 16880k reserved, 1220k
data, 308k init, 131064k highmem)
kdb version 2.5 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights
Reserved
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.65 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1985.74 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 06
Total of 2 processors activated (3971.48 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-13, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 41.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 89
0c 003 03 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 994.8832 MHz.
..... host bus clock speed is 99.4880 MHz.
cpu: 0, clocks: 994880, slice: 331626
CPU0<T0:994880,T1:663248,D:6,S:331626,C:994880>
cpu: 1, clocks: 994880, slice: 331626
CPU1<T0:994880,T1:331616,D:12,S:331626,C:994880>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfcf1e, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I14,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: using PPB(B0,I16,P0) to get irq 19
PCI->APIC IRQ transform: (B2,I4,P0) -> 19
PCI: using PPB(B0,I16,P1) to get irq 16
PCI->APIC IRQ transform: (B2,I5,P1) -> 16
PCI->APIC IRQ transform: (B3,I9,P0) -> 17
PCI->APIC IRQ transform: (B3,I10,P0) -> 18
PCI->APIC IRQ transform: (B3,I14,P0) -> 18
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS snapshot 2.4.20-2002-11-29_01:21_UTC with ACLs, no debug enabled
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S4 S5
Processor[0]: C0 C1
Processor[1]: C0 C1
ACPI: Power Button (FF) found
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD1000JB-00CRA1, ATA DISK drive
hdb: ATAPI DVD-ROM 16X, ATAPI CD/DVD-ROM drive
hdc: WDC WD800BB-32BSA0, ATA DISK drive
hdd: QUANTUM FIREBALLP AS60.0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c054a404, I/O limit 4095Mb (mask 0xffffffff)
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=12161/255/63, UDMA(33)
blk: queue c054a768, I/O limit 4095Mb (mask 0xffffffff)
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(33)
blk: queue c054a8b4, I/O limit 4095Mb (mask 0xffffffff)
hdd: 117266688 sectors (60041 MB) w/1902KiB Cache, CHS=116336/16/63, UDMA(33)
hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0:<7>ldm_validate_partition_table(): Found an
MS-DOS partition table, not a dynamic disk.
p1
/dev/ide/host0/bus1/target0/lun0:<7>ldm_validate_partition_table(): Found an
MS-DOS partition table, not a dynamic disk.
[PTBL] [9729/255/63] p1 p3
/dev/ide/host0/bus1/target1/lun0:<7>ldm_validate_partition_table(): Found an
MS-DOS partition table, not a dynamic disk.
p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.16
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
eth1: OEM i82557/i82558 10/100 Ethernet, 00:90:27:0B:E4:50, IRQ 19.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 715191-003, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eth2: OEM i82557/i82558 10/100 Ethernet, 00:90:27:0B:E4:51, IRQ 16.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 715191-003, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe8000000
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
blk: queue f7ddbe18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST318452LC Rev: EE31
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7ddbc18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST118202LC Rev: 0006
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f7ddb818, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
blk: queue f7dcd618, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
/dev/scsi/host0/bus0/target0/lun0:<7>ldm_validate_partition_table(): Found an
MS-DOS partition table, not a dynamic disk.
p1 p2 p3 p4 < p5 p6 p7 >
(scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB)
/dev/scsi/host0/bus0/target1/lun0:<7>ldm_validate_partition_table(): Found an
MS-DOS partition table, not a dynamic disk.
p1 p2 p3 p4 < p5 p6 p7 >
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 6, lun 0
(scsi1:A:6): 10.000MB/s transfers (10.000MHz, offset 8)
sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1836.400 MB/sec
32regs : 958.000 MB/sec
pIII_sse : 2048.000 MB/sec
pII_mmx : 2244.400 MB/sec
p5_mmx : 2379.600 MB/sec
raid5: using function: pIII_sse (2048.000 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
XFS mounting filesystem sd(8,3)
Starting XFS recovery on filesystem: sd(8,3) (dev: 8/3)
Ending XFS recovery on filesystem: sd(8,3) (dev: 8/3)
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 308k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 265064k swap-space (priority -1)
XFS mounting filesystem sd(8,1)
Starting XFS recovery on filesystem: sd(8,1) (dev: 8/1)
Ending XFS recovery on filesystem: sd(8,1) (dev: 8/1)
XFS mounting filesystem sd(8,5)
Starting XFS recovery on filesystem: sd(8,5) (dev: 8/5)
Ending XFS recovery on filesystem: sd(8,5) (dev: 8/5)
XFS mounting filesystem sd(8,6)
Starting XFS recovery on filesystem: sd(8,6) (dev: 8/6)
Ending XFS recovery on filesystem: sd(8,6) (dev: 8/6)
XFS mounting filesystem sd(8,7)
Starting XFS recovery on filesystem: sd(8,7) (dev: 8/7)
Ending XFS recovery on filesystem: sd(8,7) (dev: 8/7)
XFS mounting filesystem ide1(22,3)
Starting XFS recovery on filesystem: ide1(22,3) (dev: 22/3)
Ending XFS recovery on filesystem: ide1(22,3) (dev: 22/3)
XFS mounting filesystem ide0(3,1)
Starting XFS recovery on filesystem: ide0(3,1) (dev: 3/1)
Ending XFS recovery on filesystem: ide0(3,1) (dev: 3/1)
> -----Original Message-----
> From: Chris Wedgwood [mailto:cw@f00f.org]
> Sent: December 30, 2002 07:32p
> To: LA Walsh
> Cc: linux-xfs@oss.sgi.com
> Subject: Re: xfsdump...
>
>
> On Mon, Dec 30, 2002 at 06:54:21PM -0800, LA Walsh wrote:
>
> > I got the new version of the xfs patch. Seems an older version
> > xfsdump can have nasty consequences (I assume I need a newer
> > xfsdump...?)...
>
> xfsdump run many times a day for me... it has done for some time.
>
> > xfsdump: syssgi( SGI_FS_BULKSTAT ) on fsroot failed: Input/output
> > error
>
> more details please? kernel messages?
>
>
>
> --cw
>