Mirroring viewport/channel

New Message Reply Date view Thread view Subject view Author view

R. Krijnen (krijnen++at++fel.tno.nl)
Wed, 17 Nov 1999 16:31:51 +0100

Hi,

We have a mock-up where 3 of the 6 monitors are viewed through mirrors, so the
user sees a mirrored (inverted) imaged.
Is there a way of generating a mirrored pfChannel?

I tried to define the viewport the other way around but that does not work
(would be to nice).
An other way of doing it is by reversing the electronics for the horizontal
coils within the monitors. But unfortunately this only works well with black and
white monitors :-(

The output for the 6 monitors are generated using 6 pfChannels in one
pfPipeWindow.
We use an Onyx2 iR2 with a DG5-8 (8 outputs).

Thanks

begin:vcard
n:Krijnen;Robbert
tel;fax:+31 (0)70 374 0652
tel;home:+31 (0)23 542 44 43
tel;work:+31 (0)70 374 0278 / +31 (0)70 374 0000
x-mozilla-html:TRUE
url:http://www.tno.nl
org:TNO Physics and Electronics Laboratory;Command & Control and Simulation
adr:;;Oude Waalsdorperweg 63;2509 JG The Hague;;P.O. Box 96864;The Netherlands
version:2.1
email;internet:krijnen++at++fel.tno.nl
title:Scientific Researcher
note:Netherlands Organization for Applied Scientific Research (TNO)
x-mozilla-cpt:;-27504
fn:R. Krijnen
end:vcard

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Wed Nov 17 1999 - 07:32:43 PST

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.