Mark Aubin (aubin++at++mustang.engr.sgi.com)
Wed, 29 Sep 1999 09:52:39 -0700 (PDT)
You might want to check the System Manager/Serial Device Manager
and make sure that you don't have any devices added. If they are,
X will try to initialize them, send them events, and query them.
This is outside of the /etc/inittab control.
Also, how do you talk to the various ports? Do you have to re-compile
your software? If so, you might be using the wrong termio structure.
This has changed with IRIX 6.x. Older binaries still work, since they
use the original structure, but any new compile uses the new structure,
and your code will need to be updated to set it properly.
See the termio man page for more info.
--Mark Aubin
aubin++at++sgi.com
On Sep 29, 12:11pm, Gamble, Murray - Kan AV HFE wrote:
> Subject: ONYX2 Serial Port Question
>
> Hi All,
>
> I hate to send serial port questions to this group, but the scope of
> knowledge represented by the subscribers is just too darn attractive to
> ignore.
>
> Anyways, here's my problem. We have a nice new shiny ONYX2 box in our
> lab :-) and are trying to drive several serial devices from the four
> serial ports. We are using well known serial devices that have a hsitory
> of behaving well but are experiencing an inconsistency between the four
> ports. The devices work properly when attached to /dev/ttyd1 and
> /dev/ttyd2 but display garbage when connected to /dev/ttyd3 or
> /dev/ttyd4. I have checked the "/etc/inittab" file and all four ports
> are configured identically (well, actually port 1 is configured as a
> console, but with respawn turned "off" - and it works, so I won't
> complain). In addition, we have tried connecting the same devices to an
> Octane (which, upon examination of the "/etc/inittab" file has the same
> settings as the ONYX2) and they don't work there either! I get the same
> gobbledy-gook on ports 1 & 2 on the Octane as I do on ports 3 &4 on the
> ONYX2.
>
> Ultimately, we would like to drive these devices from an Octane, but have
> been using the ONYX2, since ports 1 & 2 seem to give us the only workable
> option thus far.
>
> Any and all help is greatly appreciated,
>
> Thanks,
>
> Murray.
>
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Murray G. Gamble, B.Eng
> Human Factors Engineering - Aerospace
> Marconi Canada
> Kanata, Ontario, CANADA
This archive was generated by hypermail 2.0b2 on Wed Sep 29 1999 - 09:52:47 PDT