Re: Frambuffer configuration Onyx IR
Phil Keslin (philk++at++cthulhu.engr.sgi.com)
Thu, 15 Jul 1999 10:51:44 -0700
Marc Erich Latoschik wrote:
>
> Daniel F Johnston wrote:
>
> > Menu Util
> > {
> > "1280x1024++at++114s" f.checkexec.sh "/usr/gfx/ircombine -destination
> > active -channel 0 format=/usr/gfx/ucode/KONA/dg4/vfo/1280x1024_114s.vfo"
> > "1600x1200++at++60" f.checkexec.sh "/usr/gfx/ircombine -destination
> > active -channel 0 format=/usr/gfx/ucode/KONA/dg4/vfo/1600x1200_60.vfo"
> > }
> >
>
> Hi, i have to ask another one: You don't change the global FB size and
> don't restart gfx with this approach...so when you just switch in this
> way you will have some lines (exact: 1200-1024 => 176) of the screen not
> to
> be seen, right? To reconfigure i think a stopgfx;startgfx has to be
> done...?!
One more thing. This does work well when your only objective is to
enable stereo viewing. If you have sufficient framebuffer resources to
allocate stereo visuals at the required pixel depth at 1600x1200 then
this shouldn't pose much of a problem. You must ensure that your windows
are positioned and size appropriately.
- Phil
--
Phil Keslin <philk++at++engr.sgi.com>
This archive was generated by hypermail 2.0b2
on Thu Jul 15 1999 - 10:51:47 PDT