[Fwd: Cliptextures problems]

Joe Nemethy (jnemethy++at++harris.com)
Fri, 23 Apr 1999 10:16:41 -0400

• Next message: Talal Nehme: "Texture Problems"
• Previous message: Joe Nemethy: "Re: Cliptextures problems"

Thanks in advance,

Joe Nemethy

-- 
Joe Nemethy
Harris Corporation ISD
W2/2112-A
Phone (407) 984-6117
Fax   (407) 984-6353

attached mail follows:
Date: Fri, 23 Apr 1999 10:03:30 -0400


From: Joe Nemethy 


To: info-performer++at++sgi.com, allan++at++southpark.engr.sgi.com,	zhz++at++dandan.engr.sgi.com


Subject: Re: Cliptextures problems


   I should have specified the hw configuration and OS.

   I'm running on an 8 processor Onyx2 IR with 2 pipes.  One pipe has 2
RMs the other 1 RM.  I use only one pipe.  This is with IRIX 6.2 and
Performer 2.2.  I load the cliptextures after pfConfig.  When I run my
application in multiprocess or single process mode I get the same queue
sort errors.  I set the pfNotifyLevel to status everything and receive
messages that the mp cliptextures are loaded correctly, unfortunately
they are not displayed correctly.

   Does anyone know if the queue sorting problem is related to my
cliptexture problem? As stated in my previous messages, I do not get the
queue sort errors with clipfly or cliptex apps.


Can anyone help?  

Thanks in advance,

Joe Nemethy

"Dorosky, Christopher G" wrote:
> 
> If you are running 6.5.2 if had problems with sproc and queue stuff....
> 
> Chris
> 
> > ----------
> > From:         Joe Nemethy[SMTP:jnemethy++at++harris.com]
> > Sent:         Wednesday, April 21, 1999 12:41 PM
> > To:   info-performer++at++sgi.com
> > Subject:      Cliptextures problems
> >
> >
> > I'm getting queue sort errors when loading pfClipTextures into my
> > application.  I'm using the pfuClipCenterNode with non-virtual
> > cliptextures and one channel.  I generated the cliptexture pyramids
> > using clipgen.  The clipcenters are getting updated but the texture is
> > not correct.  It is leftover texture from a previous run of clipfly or
> > cliptex.
> >
> > |Sample error:
> > |
> > |   MUSTRUN of QUEUE_SERVICE on process -1 on CPU 0 failed
> > |   FAILED to SPROC_QUEUE_PROC
> > |   MUSTRUN of PFPROC_QUEUE_SORT process -1 on CPU 0 failed
> > |   pfQueue::setSortMode, couldn't sproc sortProc, sort mode failed.
> >
> >
> > I had success loading two cliptextures with the associated geometry into
> > the cliptex application, using pfMPClipTextures directly and controlling
> > the centering of the cliptextures in the main loop.  I did this to
> > validate that two cliptextures can work independently.  I do not get any
> > queue sort errors while using the clipfly or cliptex applications.
> >
> >
> > Any suggestions?
> >
> > Thanks,
> >
> > --
> > Joe Nemethy
> > Harris Corporation ISD
> > W2/2112-A
> > Phone (407) 984-6117
> > Fax   (407) 984-6353
> > -----------------------------------------------------------------------
> > List Archives, FAQ, FTP:  http://www.sgi.com/software/performer/
> >             Submissions:  info-performer++at++sgi.com
> >         Admin. requests:  info-performer-request++at++sgi.com
> >

-- 
Joe Nemethy
Harris Corporation ISD
W2/2112-A
Phone (407) 984-6117
Fax   (407) 984-6353






Next message: Talal Nehme: "Texture Problems"
Previous message: Joe Nemethy: "Re: Cliptextures problems"






New Message
Reply
Date view
Thread view
Subject view
Author view







This archive was generated by hypermail 2.0b2 
on Fri Apr 23 1999 - 07:14:50 PDT




This message has been cleansed for anti-spam protection.  Replace '++at++' in any mail addresses with the '@' symbol.