ircombine on Onyx2

New Message Reply Date view Thread view Subject view Author view

Charlie H. Chang (a00chc00++at++nchc.gov.tw)
Mon, 12 Apr 1999 16:43:11 +0800

Hi all,

I am trying to use "ircombine" in my shell script to
start up my application in 1024x768 stereo mode.

I tried the following commands:
(1) /usr/gfx/ircombine -destination active -global size=1024x768 \
                                       -channel 0
format=1024x768_96s.cmb
      This resulted with the message: "1024x768_96s.cmb" not found.
      But there is the "1024x768_96s.cmb" file in
/usr/gfx/ucode/KONA/cmb
(2) /usr/gfx/ircombine -destination active -global size=1024x768 \
                                      -channel 0 format=1024x768_96s.vfo

     This worked but the frame buffer size was still 1280x1024 instead
of
     what I wanted "1024x768".

I have used ircombine in GUI mode to create a "my_format.cmb" with
managed area=1024x768 and channel format=1024x768_96s.vfo.
And use ircombine in GUI mode to load "my_formate.cmb" works.
But I need to be able to do that in a shell script.

Any suggestions? What have I done wrong?
Thank you in advance!

--
Charlie H. Chang                E-mail: a00chc00++at++nchc.gov.tw
Voice: 886-3-5776085x209        Fax: 886-3-5773620
Media & Visualization Lab,
National Center for High-performance Computing

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Apr 12 1999 - 01:38:35 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.