Problem with ClipTexture & PFPHASE_LOCK II

New Message Reply Date view Thread view Subject view Author view

Vicente Javier Sevilla Peris (jsevilla++at++glup.irobot.uv.es)
Mon, 22 Mar 1999 16:03:50 +0100

Hello All

Maybe I didn't explain my problem so good.
Please, excuse me, I try to explain it, again.
I haven't had problems with ircombine and PFPHASE_LOCK.
I have an aplication that use cliptextures.
This aplication works well in FREE_RUN mode, but sometimes drops from 60Hz to
30Hz.
These drops are bad, because make an ugly effect, but no too bad, because the
aplication requirement is a framerate of 30Hz with 3 channels.
In order to avoid the drop effect I fix the frame rate with PFPHASE_LOCK to
30Hz, but works in a worse way that in a FREE_RUN mode.
If I remove the cliptextures, the LOCK mode works fine, but with cliptextures
works worse.

Why works worse in LOCK mode?
How can I do to works better?

Thanks for all.

Javier.
_____________________________________________________________________

 Javier Sevilla Peris mailto:jsevilla++at++glup.irobot.uv.es
            _______
           / /___\ \
 LISITT / / \ \ R T E C

 Phone: +34 6 360 4484
 Dept. Electr. & Informatics Addr: Poligono de la Coma s/n
 University of Valencia Valencia (SPAIN)

_____________________________________________________________________

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Wed Mar 24 1999 - 09:01:40 PST

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.