Re: The textures on Octane MXI looks dirty

New Message Reply Date view Thread view Subject view Author view

Rob Jenkins (robj++at++sgi.com)
Tue, 19 Jan 1999 00:04:55 -0800

Hector

This sounds like it might be a HW problem with the TRAM. Normally TRAM
failures are pretty obvious, weird colors etc but no doubt there can be
subtle TRAM problems too. I suggest you try running a standard demo like
texcube that you know looks alright on 'good' HW as a testcase and if
possible run the customers application another OCTANE to double check.

Cheers
Rob

Hector Morales Campos wrote:
>
> Hello Everyone !!!!
>
> I have a Customer using Performer 2.2 on Onyx and O2, He development a
> proyect
> on those machines, and he bought a Octane MXI. The problem is when he wants
> to use the same proyect on that new machine. the texture looks a litle spotty,
> all of the images are RGB 24 bits.
>
> One test that I did, was run the same project without TMEZ board in the
> Octane, and looks better but it ran slowly, and It isn't better as O2 or Onyx.
>
> Does any body know something about it, any information is helpfull
>
> Thanks a lot !!!!!
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/software/performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com

-- 
________________________________________________________________
Rob Jenkins	Silicon Graphics 	mailto:robj++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Tue Jan 19 1999 - 00:11:06 PST

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.