Joaquin Casillas Melendez (jcasilla++at++glup.irobot.uv.es)
Fri, 02 Oct 1998 13:46:34 +0200
>
> ircombine can be installed and run on any SGI machine, if you run it up
> and select a 'target' of 'user defined HW' then edit that HW to have
> 4RMs ( and 8 channels in your case ) you can try this kind of thing for
> yourself. I only tried quickly but I reckon you could only do
> 4x1280x1024 if you drop the swapbuffer rate to 50hz else you exceed
> bandwidth limits. If you ask for 'deepest' pixels, you get medium depth
> I think. The max managed area size is 3840 ( which fits OK with what I
> think you were describing above with the overlap ).
>
> Cheers
> Rob
>
Hello again.
I have tried some configurations with ircombine, but I have a problem
with the origin field. The configuration I need is :
Channel 0: size 1280x1024 origin 0,0
Channel 1: size 1280x1024 origin 1280,0
Channel 3: size 1280x1024 origin 2560,0
Channel 4: size 1280x1024 origin 1280,0
The problem is that the origin field doesn't accept these origin values.
Anyway with 4 1280x1024_60 hz channels the bandwith is exceeded. So I
will try something like 3 1024x768_60 + 1 1280x1024_60 channel
configuration. It could be good enough for the visual app.
Thanks for the responses.
-----------------------------------------------
Joaquin Casillas Melendez mailto:jcasilla++at++glup.irobot.uv.es
LISITT (ARTEC) Phone: +34 6 360 4484
Dept. Electr. & Informatics Addr: Poligono de la Coma s/n
University of Valencia Valencia (SPAIN)
This archive was generated by hypermail 2.0b2 on Fri Oct 02 1998 - 05:17:44 PDT