Re: video out on IR

New Message Reply Date view Thread view Subject view Author view

Bob Cowling (cowling++at++autometric.com)
Mon, 08 Jun 1998 10:43:40 -0400

On the Onyx RE2, the jack is labelled as SVHS.
The jack is really S-Video. The Onyx2 IR will have the
jack labelled correctly (S-Video).

(SVHS is a video tape format, S-Video is a cable and
video signal format)

Angus Dorbie wrote:
>
> ken sartor wrote:
> >
> > Hi -
> >
> > This is off topic, i apologize, but i need a fast
> > and accurate answer...
> >
> > What video out comes standard on an Onyx2 IR?
> > On my Onyx RE2 i have both a bnc with composite
> > output and a svhs output jack.
> >
>
> You have composite and SVHS for y/c component video.
>
> There is the added advantage that on iR the pal or ntsc
> resolution image is scan converted from any resolution
> up to 1280x1024 so it's a much better solution. There
> is also an adjustable interlace deflicker control.
>
> If you need professional quality video out you can
> also buy the GVO option.
>
> Cheers,Angus.
> 

-- 
--------------------------------------------------------------------
Robert Cowling                         mailto:cowling++at++autometric.com
Director, Engineering                                 (703) 923-4035
Advanced Visualization & Integration       http://www.autometric.com
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:57:31 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.