Re: SYSLOG-Warning

New Message Reply Date view Thread view Subject view Author view

Ong Tze Lin (tzelin++at++nuno.singapore.sgi.com)
Tue, 12 May 1998 02:38:10 -0700

Hi

Have you tried running irsaudit to pinpoint the problem? I have come across
this kind of error message several times and more often than not its due to a
bad (or badly-seated) RM board.

Run irsaudit as root off a laptop or dumb terminal, but not on the graphics
console:

First, stop graphics with /usr/gfx/stopgfx.

Run /usr/diags/IR/bin/irsaudit and sit back while it churns away. It will take
some time to complete and return, but it will display its test results along
the way- you'll know if you have bad parts.

Restart graphics with /usr/gfx/startgfx.

Hope this helps.

Tzelin

On May 12, 5:33pm, Masahiko Yamanaka wrote:
> Subject: SYSLOG-Warning
> Hello all!
>
> Though this might be a simple H/W problem, I believe someone in this ML
> know about this...
>
> One of my customers has Onyx2/iR and a Performer-based application.
>
> As running the app., sometimes the window disappears and SYSLOG says,
>
> WARNING:IR0:Pipe hung: on TBUS or ARM activity
> WARNING:IR0:Timeout waiting for fifo to drain ( level == 0x70a)
>
> What does this mean, what's wrong?
> Or should I explain more details? (Sorry, I have only above right now...)
>
> Any help will be greatly appreciated!
>
> Thank you,
> --
> M.Y.
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from Masahiko Yamanaka

-- 
Ong Tze Lin 				Technical Consultant	
Silicon Graphics ASEAN HQ		High-Performance Computer Graphics
89 Science Park Dr. #03-03 to 06 	
The Rutherford, Singapore 118261	Tel: (065)777 3088  Fax: (065)779 3650      
   
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:57:23 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.