Scott A. Friedman (friedman++at++ucla.edu)
Tue, 07 Apr 1998 17:06:49 -0700
Moving to the released version of Performer 2.2...
Switch values do not change in the cull process when running under
APP_CULL_DRAW. APP and DRAW report the correct value using getVal().
When running under APPCULLDRAW or APPCULL_DRAW there is no problem -
which I suppose is to be expected since APP and CULL are using the same
copy of the node on both cases. I have tried this under irix 6.2,6.3
and 6.4 / N32 and O32 - all do the same thing - switch value not
updated in CULL.
The switch was allocated from the APP process if that matters.
Interestingly, when I call setVal with a constant (e.g. 2) and not a
variable it works - go figure.
BTW - this was working with earlier beta versions of Performer 2.2.
Suggestions as to what may be wrong are appreciated. I am a little
confused since this same code has worked for several years now without a
problem.
Thanks,
Scott
Scott Friedman
UCLA
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:57:13 PDT