Rob Jenkins (robj++at++quid.csd.sgi.com)
Wed, 11 Feb 1998 13:45:38 -0800
presumably this would also have gone away with il_eoe installed, there's a
il_eoe.sw.il2_5 that has the old compat libs.
Cheers
Rob
On Feb 11, 9:56pm, Ran Yakir wrote:
> Subject: Re: .iv loader error in pf2.2
> Hi Rob, Roy and everyone,
>
> I've had a similar problem today with the 3DS loader. It turned out that the
> loader could not be loaded because it has libil ver. 2.0 on its liblist (run
> elfdump -L libpf3ds_ogl.so to see the liblist). This means that the 3ds
shared
> object was linked on IRIX 6.2, and had a -lil in its ld command. When I
compiled
> the 3ds loader source, available in /usr/share/Performer/src, it didn't have
any
> -lil in the ld command, and so was created without that reference in the
liblist.
> I assume that the same problem
> happens with the iv loader, if you are running on IRIX 6.3 or 6.4.
> The solution to this can be linking the libraries without the liblist
section,
> when they should run on 6.2 and up.
>
> Ran
>
>
>
> Rob Jenkins wrote:
>
> > also check which perfly you're using ( which perfly | xargs ls -l ) note
that
> > in pf 2.2 the perfly exes moved, try a few different ones ( see ls
> > /usr/demos/Performer/bin ).
> >
> > Cheers
> > Rob
> >
> > On Feb 11, 1:55pm, Roy Ruddle wrote:
> > > Subject: .iv loader error in pf2.2
> > > Hi chaps,
> > >
> > > I'm progressing slowly but now I have another problem. I hope u can help!
> > >
> > > Running perfly I can load .flt .sv .dxf .dwb .wrl and .obj DBs correctly.
> > > However, when I try to load any .iv file (e.g., windmill.iv or xforms.iv,
> > > both IV v2.0 DBs that are on the pf2.2 CD) I get the following messages:
> > >
> > > PF Warning: pfdFindConverterDSO() - Could not load DSO for extension
"iv20"
> > > PF Warning: pfdFindConverterDSO() - Could not load DSO for extension "iv"
> > > PF Warning: pfdLoadFile() - Unable to load file windmill.iv because of
> > > problem finding pfdLoadFile_iv
> > >
> > > WHY, WHY, WHY?
> > >
> > > The library files appear to be present and in the correct place (I should
> > > be using the default libraries, i.e., n32):
> > > /usr/lib32/libpfdb:
> > > libpfiv.so
> > > libpfiv_igl.so
> > > libpfiv_igl.so.4
> > > libpfiv_ogl.so
> > > libpfiv_ogl.so.4
> > >
> > > /usr/lib/libpfdb:
> > > libpfiv.so
> > > libpfiv20.so
> > > libpfiv20_igl.so
> > > libpfiv20_igl.so.4
> > > libpfiv20_ogl.so
> > > libpfiv20_ogl.so.4
> > > libpfiv_igl.so
> > > libpfiv_igl.so.4
> > > libpfiv_ogl.so
> > > libpfiv_ogl.so.4
> > >
> > > Surely the fact that the other types of DB load correctly indicates that
> > > pf2.2 is installed correctly (I've got a completely standard installation
> > > in terms of the directory structure)?
> > >
> > > Suggestions gratefully received.
> > >
> > > roy
> > >
> > >
> > > =======================================================================
> > > List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> > > Submissions: info-performer++at++sgi.com
> > > Admin. requests: info-performer-request++at++sgi.com
> > >-- End of excerpt from Roy Ruddle
> >
> > --
> > ________________________________________________________________
> > Rob Jenkins mailto:robj++at++sgi.com
> > Silicon Graphics, Mtn View, California, USA
> > =======================================================================
> > List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> > Submissions: info-performer++at++sgi.com
> > Admin. requests: info-performer-request++at++sgi.com
>
>
>
> --
> __ | Ran Yakir
> /_) _ __ \ / _ / o __ | 28 Ben Gurion St.
> / )_ (_(_) ) \/ (_(_/<_(_)( | Hod Hasharon 54200
> _/ | Israel
> -------------------------------------+--------------------------------
> At Home : | At Work :
> | RT-SET
> Voice : +972-9-7489974 | Voice : +972-9-9552236
> Fax : +972-9-7422149 | Fax : +972-9-9552239
> E-mail : rany++at++netvision.net.il | E-mail : rany++at++rtset.co.il
> http://rtset.co.il/rany
>
>
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from Ran Yakir
On Feb 11, 9:58pm, Ran Yakir wrote:
> Subject: Re: .iv loader error in pf2.2 (cont.)
> Ofcourse, I forgot to mention that after compiling the 3ds loader
> source, without the -lil, and running it, my 3ds files were loaded OK,
> and the loader was found.
>
> Ran
>
> --
> __ | Ran Yakir
> /_) _ __ \ / _ / o __ | 28 Ben Gurion St.
> / )_ (_(_) ) \/ (_(_/<_(_)( | Hod Hasharon 54200
> _/ | Israel
> -------------------------------------+--------------------------------
> At Home : | At Work :
> | RT-SET
> Voice : +972-9-7489974 | Voice : +972-9-9552236
> Fax : +972-9-7422149 | Fax : +972-9-9552239
> E-mail : rany++at++netvision.net.il | E-mail : rany++at++rtset.co.il
> http://rtset.co.il/rany
>
>
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from Ran Yakir
--
________________________________________________________________
Rob Jenkins mailto:robj++at++sgi.com
Silicon Graphics, Mtn View, California, USA
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:56:46 PDT