Inge E.Henriksen (inge++at++autosim.no)
Wed, 11 Feb 1998 13:33:07 +0100
Greetings!
---------------------------------------------------------------------------
Inge E.Henriksen, Database designer
Autosim A/S, P.B.2303, 9001 Tromsoe, Norway
Tlf.+47 77675075, fax +47 77676701
---------------------------------------------------------------------------
*****************************************John.3.16-21
---------------------------------------------------------------------------
>***************************************************************************
***
>
> From: dweller++at++rivatech.com (David Weller)
> Date: Tue, 10 Feb 1998 11:47:11 -0600 (CST)
> Subject: Kaiser HMD and Indigo2 interfacing...
>
>OK, apologies for a slightly non-Performer-ish posting, but I kinda
>figured y'all would be able to help.
>
>We have an Indigo2 Max Impact that we're trying to interface into a
>Kaiser ProView 50ST. We haven't started poking around all that much,
>but it _appears_ we need to physically split the signal coming out the
>9-pin port on the Max Impact board into two separate 15-pin (VGA)
>inputs on the Kaiser interface box. The (very) sparse Kaiser
>documentation says to use the left channel input if you have a single
>video input, but it doesn't say whether it internally detects if the
>actual signal is a stereoptic signal.
>
>Has anybody on this mailing list wrestled with a similar situation?
>(Setting up two channels in Performer was the easy part :-)
>
>
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:56:46 PDT