Kaiser HMD and Indigo2 interfacing...

New Message Reply Date view Thread view Subject view Author view

David Weller (dweller++at++rivatech.com)
Tue, 10 Feb 1998 11:47:11 -0600 (CST)

OK, apologies for a slightly non-Performer-ish posting, but I kinda
figured y'all would be able to help.

We have an Indigo2 Max Impact that we're trying to interface into a
Kaiser ProView 50ST. We haven't started poking around all that much,
but it _appears_ we need to physically split the signal coming out the
9-pin port on the Max Impact board into two separate 15-pin (VGA)
inputs on the Kaiser interface box. The (very) sparse Kaiser
documentation says to use the left channel input if you have a single
video input, but it doesn't say whether it internally detects if the
actual signal is a stereoptic signal.

Has anybody on this mailing list wrestled with a similar situation?
(Setting up two channels in Performer was the easy part :-)

=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:56:45 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.