ASD demo

New Message	Reply	Date view	Thread view	Subject view	Author view

Carol Pawlowski (pawlowsk++at++ait.nrl.navy.mil)
Mon, 15 Dec 1997 20:38:44 -0500

Next message: Philip Nemec: "Re: Flying in from Earth to California"
Previous message: Carol Pawlowski: "Flying in from Earth to California"

Hi,

I'm running the /usr/demos/all/HighEnd/sgi/ASD/sf demo and I am bombing
out on OpenGL Error 0x8065 - specified texture too large.

Do I need to reconfigure my system? I am using the following
configuration:

vinson: sf> hinv
Processor 0: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 1: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 2: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 3: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Secondary unified instruction/data cache size: 1 Mbyte
Data cache size: 32 Kbytes
Instruction cache size: 32 Kbytes
Main memory size: 512 Mbytes, 2-way interleaved
I/O board, Ebus slot 7: IO4 revision 1
I/O board, Ebus slot 9: IO4 revision 1
I/O board, Ebus slot 11: IO4 revision 1
Integral EPC serial ports: 12
Graphics board: InfiniteReality
Graphics board: InfiniteReality
Integral Ethernet controller: et0, Ebus slot 11
EPC external interrupts
Integral SCSI controller 91: Version WD33C95A, differential, revision 0
Integral SCSI controller 90: Version WD33C95A, single ended, revision 0
  CDROM: unit 4 on SCSI controller 90
Integral SCSI controller 71: Version WD33C95A, differential, revision 0
Integral SCSI controller 70: Version WD33C95A, single ended, revision 0
Integral SCSI controller 4: Version WD33C95A, differential, revision 0
Integral SCSI controller 3: Version WD33C95A, differential, revision 0
  Disk drive: unit 4 on SCSI controller 3
  Disk drive: unit 3 on SCSI controller 3
  Disk drive: unit 2 on SCSI controller 3
  Disk drive: unit 1 on SCSI controller 3
Integral SCSI controller 2: Version WD33C95A, differential, revision 0
  Disk drive: unit 8 on SCSI controller 2
  Disk drive: unit 7 on SCSI controller 2
  Disk drive: unit 6 on SCSI controller 2
  Disk drive: unit 5 on SCSI controller 2
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
  Disk drive: unit 3 on SCSI controller 1
  Disk drive: unit 2 on SCSI controller 1
  Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Disk drive: unit 7 on SCSI controller 0
  Tape drive: unit 5 on SCSI controller 0: 8mm(8500) cartridge
  Tape drive: unit 4 on SCSI controller 0: unknown
CC synchronization join counter
Integral EPC parallel port: Ebus slot 7
Integral EPC parallel port: Ebus slot 9
Integral EPC parallel port: Ebus slot 11
VME bus: adapter 0 mapped to adapter 45
VME bus: adapter 30
VME bus: adapter 38
VME bus: adapter 45
vinson: sf>

-- --------------------------------------------------------------- Carol Pawlowski pawlowsk++at++ait.nrl.navy.mil Code 5585, AIT/ITD Naval Research Laboratory Pho: (202)767-3040 Washington, DC 20375-5337 FAX: (202)767-1122 ---------------------------------------------------------------

Hi,

I'm running the /usr/demos/all/HighEnd/sgi/ASD/sf demo and I am bombing out on OpenGL Error 0x8065 - specified texture too large.

Do I need to reconfigure my system? I am using the following configuration:

vinson: sf> hinv
Processor 0: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 1: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 2: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Processor 3: 194 MHZ IP25
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Secondary unified instruction/data cache size: 1 Mbyte
Data cache size: 32 Kbytes
Instruction cache size: 32 Kbytes
Main memory size: 512 Mbytes, 2-way interleaved
I/O board, Ebus slot 7: IO4 revision 1
I/O board, Ebus slot 9: IO4 revision 1
I/O board, Ebus slot 11: IO4 revision 1
Integral EPC serial ports: 12
Graphics board: InfiniteReality
Graphics board: InfiniteReality
Integral Ethernet controller: et0, Ebus slot 11
EPC external interrupts
Integral SCSI controller 91: Version WD33C95A, differential, revision 0
Integral SCSI controller 90: Version WD33C95A, single ended, revision 0
CDROM: unit 4 on SCSI controller 90
Integral SCSI controller 71: Version WD33C95A, differential, revision 0
Integral SCSI controller 70: Version WD33C95A, single ended, revision 0
Integral SCSI controller 4: Version WD33C95A, differential, revision 0
Integral SCSI controller 3: Version WD33C95A, differential, revision 0
Disk drive: unit 4 on SCSI controller 3
Disk drive: unit 3 on SCSI controller 3
Disk drive: unit 2 on SCSI controller 3
Disk drive: unit 1 on SCSI controller 3
Integral SCSI controller 2: Version WD33C95A, differential, revision 0
Disk drive: unit 8 on SCSI controller 2
Disk drive: unit 7 on SCSI controller 2
Disk drive: unit 6 on SCSI controller 2
Disk drive: unit 5 on SCSI controller 2
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Disk drive: unit 3 on SCSI controller 1
Disk drive: unit 2 on SCSI controller 1
Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
Disk drive: unit 7 on SCSI controller 0
Tape drive: unit 5 on SCSI controller 0: 8mm(8500) cartridge
Tape drive: unit 4 on SCSI controller 0: unknown
CC synchronization join counter
Integral EPC parallel port: Ebus slot 7
Integral EPC parallel port: Ebus slot 9
Integral EPC parallel port: Ebus slot 11
VME bus: adapter 0 mapped to adapter 45
VME bus: adapter 30
VME bus: adapter 38
VME bus: adapter 45
vinson: sf>

-- 
---------------------------------------------------------------
Carol Pawlowski              pawlowsk++at++ait.nrl.navy.mil
Code 5585, AIT/ITD           
Naval Research Laboratory    Pho: (202)767-3040
Washington, DC  20375-5337   FAX: (202)767-1122
---------------------------------------------------------------

======================================================================= List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/ Submissions: info-performer++at++sgi.com Admin. requests: info-performer-request++at++sgi.com

Next message: Philip Nemec: "Re: Flying in from Earth to California"
Previous message: Carol Pawlowski: "Flying in from Earth to California"

New Message	Reply	Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:56:25 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.