Ran Yakir (rany++at++rtset.co.il)
Fri, 05 Sep 1997 18:01:03 +0300
> Hi,
>
> In our application we need to output four 640x480 and four 320x240
> channels.
> We use DG4-8 on our Onyx2 IR (R10000) machine and have 8 VGA
> monitors conneted to the output ports. The problem is that those
> 320x240
> images get scaled up on the VGA monitors and cover the whole screen,
> and
> we
> would like to make the image to be displayed at the center of the
> screen
> and covering
> 1/4 of the screen area.
> Is there anyway to do that?
>
You could define the output format of the four 320x240 channels to be
640x480, and use pfChanViewport to set the active draw viewport of your
channels to 320x240. I don't know if 8x640x480 channels can be output
from your machine, but I suppose they can, and ircombine will tell you
for sure.
Ran
--
__ | Ran Yakir
/_) _ __ \ / _ / o __ | 28 Ben Gurion St.
/ )_ (_(_) ) \/ (_(_/<_(_)( | Hod Hasharon 54200
_/ | Israel
-------------------------------------+--------------------------------
At Home : | At Work :
| RT-SET
Voice : +972-9-7489974 | Voice : +972-9-9552236
Fax : +972-9-7422149 | Fax : +972-9-9552239
E-mail : rany++at++netvision.net.il | E-mail : rany++at++rtset.co.il
http://rtset.co.il/rany
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:53 PDT