Re: about DG5 outputs

New Message	Reply	Date view	Thread view	Subject view	Author view

Eric Kunze (ekunze++at++yacko)
Mon, 18 Aug 1997 09:40:07 -0700

> One DG5 board has (2or8) outputs + some composite outputs.
> Some composite outputs are internaly same, aren't they?

Yes, the composite outputs all contain the same data.

>
> So my question is, if I use DG5-8, can I use 8+1=9 outputs simultaneously?

No. The encoder uses some of the hardware used by channel 1, so if the
encoder is running, you may not use channel 1.

So you have 7+1 = 8 outputs simultaneously.

>
> When I used ircombine on iR before, I saw [Encoder] button beside [Channel]
> buttons (Currently, I don't use iR and cannot confirm this).

If the encoder is selected, the channel 1 button will be disabled.

Eric

=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com

New Message	Reply	Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:45 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.