Re: about DG5 outputs

New Message Reply Date view Thread view Subject view Author view

Mark Negovan (markn++at++trevose.sgi.com)
Mon, 18 Aug 1997 10:45:09 -0400

Hi Yamanaka,

The composite output requires the use of one of the channels so
there are only 2 or 8 outputs (DG5-2 or DG5-8).

Mark
YAMANAKA MASAHIKO wrote:
>
> Sorry, this is not a Performer question, but there are many iR(DG5) users
> in this ML, so please let me ask a simple question about DG5...
>
> One DG5 board has (2or8) outputs + some composite outputs.
> Some composite outputs are internaly same, aren't they?
>
> So my question is, if I use DG5-8, can I use 8+1=9 outputs simultaneously?
>
> When I used ircombine on iR before, I saw [Encoder] button beside [Channel]
> buttons (Currently, I don't use iR and cannot confirm this).
>
> Thanks,
> --
> M.Y.
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com

-- 
___________________________________________________________________
Mark Negovan                          PHONE:  215 658 7000
Systems Engineer                      FAX:    215 638 9285
Silicon Graphics Cray Research Inc.   EMAIL:  markn++at++trevose.sgi.com
___________________________________________________________________
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:45 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.