RE2 to SVGA

New Message Reply Date view Thread view Subject view Author view

sbrown++at++nestor.ucsd.edu
Thu, 7 Aug 1997 16:41:54 -0700

I need to send my Onxy RE2 output to an SVGA projector (800x600).

I've tried a 13W3 to VGA HD15 adapter for the connection and I set the graphics
to 800x600_60, but the projector doesn't detect the signal.
I've tried a variety of configuration for sync configuration with no luck.
However this configuration does display correctly on a 17" O2 monitor.
The projector will run fine if connected to the output of a SVGA PC.

Anybody know the correct way to do this?

Thanks,

-- 
Sheldon Brown
Assistant Professor
Visual Arts Dept.
University of California at San Diego
9500 Gilman Drive
La Jolla, CA 92093
voice/fax (619) 534-2423


sgbrown++at++ucsd.edu
http://www-crca.ucsd.edu/~sheldon


=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:43 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.