flysiml++at++public.bta.net.cn
Tue, 13 May 1997 10:48:35 +0900
I'm going to install IRIX6.2/IDO6.2/Performer2.0 on
Onyx(see bellow for it's hardware configuration),what
patches are needed and how to install them?
thanks in advance
Cao Zhigang
===================================
E-Mail: flysiml++at++public.bta.net.cn
Tel: (8610)68428861-340
Fax: (8610)68424844
===================================
**************************************************************
RS1 5% hinv
1 200 MHZ IP19 Processor
CPU: MIPS R4400 Processor Chip Revision: 6.0
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 128 Mbytes, 2-way interleaved
I/O board, Ebus slot 3: IO4 revision 1
Integral EPC serial ports: 4
Multi-Channel Option board installed
RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip
rev 2)
Integral Ethernet controller: et0, Ebus slot 3
EPC external interrupts
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Disk drive: unit 1 on SCSI controller 1
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
Tape drive: unit 6 on SCSI controller 0: DAT
CDROM: unit 5 on SCSI controller 0
CC synchronization join counter
Integral EPC parallel port: Ebus slot 3
VME bus: adapter 0 mapped to adapter 13
VME bus: adapter 13
*********************************************************************
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:13 PDT