Re: Vision Works

New Message Reply Date view Thread view Subject view Author view

Bernard Leclerc (bleclerc++at++poster.cae.ca)
Wed, 09 Apr 1997 12:02:01 -0400

> Is anybody out there using Vision Works still???
>
> I'm having problems with setting up cprops for a sim that has tall
> mountains on both sides of a somewhat narrow channel(Vancouver B.C.)
> The convergence from channel 0 to chan 1 isnt happening...
>
> especially when painting tall mountains from one chan to another!!
>
> any info will be much appreciated....
>
> Thanks Joe :-)
>
> e-mail---- msitech++at++edgenet.net

Try contacting Paradigm Simulation - who produced VisionWorks 4 years
ago - by sending e-mail to info-vega++at++paradigmsim.com.

More on Paradigm is available at http://www.paradigmsim.com

BTW, I've used VisionWorks at the end of 93 and beginning of 94. At that
time, I had no convergence problem with a 3-channel application. I had
to do nothing to make sure the edges were matching properly. It simply
worked.

Is the aspect ratio properly set? Is it the same on both channels? These
are questions you could ask yourself.

Good luck.

-- 
Bernard Leclerc, Technical Leader, 3-D Graphics Applications
CAE Electronics Ltd. (http://www.cae.ca)
8585 Cote De Liesse, Saint-Laurent, Quebec, Canada, H4L-4X4
tel: +1 514 341 2000 extension 2275, fax: +1 514 340 5496
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:02 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.