Re: How to Capture in real time

New Message Reply Date view Thread view Subject view Author view

Mark Baranowski (baranowski++at++marklynn.demon.co.uk)
Sun, 06 Apr 1997 17:33:23 GMT

On Sun, 6 Apr 1997 15:56:17 +0800 (SGT), you wrote:

>Hello.
>How do I capture simulation from my IR screen and output it directly
>onto a VCR? I need to show some visitors my work. But I cannot find
>any commands to output my screen in real time directly onto a VCR.
>I'm using IR with 2 processors and IRIX 6.2. On the RE, I know I
>could use vout which worked very well. But now, with this IR,
>it just cannot work! There is no vout command.
>
>Could someone help pls!

You need to use /usr/gfx/ircombine. See the man pages or the online
insight book.

Basically you need to set up the encoder channel to output either a
NTSC or PAL signal. You can set the area which it encodes as well, so
you can output for example a full screen 1280x1024 image to your VCR.

Hope this helps.

Mark

-- 
Mark Baranowski at home (baranowski++at++marklynn.demon.co.uk)
Nottingham. England. UK.
===================================List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:55:01 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.