Re: How to indentify Max. Impact frame buffer

New Message Reply Date view Thread view Subject view Author view

Angus Dorbie (dorbie++at++bitch.reading.sgi.com)
Mon, 3 Mar 1997 14:21:34 +0000

Using glxinfo it looks like you need to request visual id 0x2f.

Cheers,
Angus.

On Mar 3, 3:18pm, Jim wrote:
> Subject: How to indentify Max. Impact frame buffer
> Hi Performers:
> Is there anyone can tell me how to indetify Max. Impact
> that its high color resolution up to 12bit per components in
> 1280*1024. I'd like to persuade my customer to believe that.
>
> Thanks lots!
> JIM
>
> -------------------------------------------------------------------------------
> Jim Tsai
> Software Engineer Visual Simulation sec.
> System & Technology Corp. Taipei
>
> Email : jim++at++systech.hinet.net Tel: 886-2-6981599 Fax: 886-2-6981211
> Address: 18F-5, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-chih, Taipei Hsien,
Taiwan, R.O.C.
>
>
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from Jim

=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:49 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.