Re: HELP: Performer LOD multi-channel problem

New Message Reply Date view Thread view Subject view Author view

Angus Dorbie (dorbie++at++bitch.reading.sgi.com)
Wed, 12 Feb 1997 10:36:37 +0000

Sounds like a problem with lod scale on one of the channels.

Try chan sharing the LODs but make the 'correct' channel the master.

Cheers,
Angus.

On Feb 11, 10:44am, James A. Squires wrote:
> Subject: HELP: Performer LOD multi-channel problem
>
> >Path:
nntp2.ba.best.com!news1.best.com!newshub1.home.com!news.home.com!enews.sgi.com!news.sgi.com!howland.erols.net!feed1.news.erols.com!cwix!uunet!in3.uu.net!165.254.2.52!news.new-york.net!wlbr!news.cerf.net!nic.cerf.net!jsquires
> >From: jsquires++at++nic.cerf.net (James A. Squires)
> >Newsgroups: comp.sys.sgi.graphics
> >Subject: HELP: Performer LOD multi-channel problems
> >Date: 9 Feb 1997 20:29:58 GMT
> >Organization: CERFnet
> >Lines: 22
> >Message-ID: <5dlc46$foe++at++news.cerf.net>
> >NNTP-Posting-Host: nic.cerf.net
> >Xref: nntp2.ba.best.com comp.sys.sgi.graphics:11654
>
> Gretings kind Performer expert !
>
> I've done everything I could think of to solve this problem,
> (online/offline manuals, usenet archives, etc.) and it's killing us.
>
> I'm running on a IR one pipe sytem, using Performer 2.x displaying
> three channels.
>
> We created a simple 2 LOD roadway (mgen 1.2.3 saved as 14.2 flt)
> and when the channels are not slaved, I get the first channle
> correctly showing the high LOD, but the side channels show
> the lower LOD !
>
> When slaved, they all show the lower LOD.
>
> Any suggestions ?
>
> Please email jas++at++jas.com.
>
> Thank you so much for your time,
> -JAS
>
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from James A. Squires

=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:38 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.