Re: vga for PC-monitor

New Message Reply Date view Thread view Subject view Author view

Brian Furtaw (brian++at++sgi.com)
Mon, 13 Jan 1997 10:07:19 -0500

To find out common PC video formats and update rates try looking at PC graphics
cards web sites. I was looking at www.diamondmm.com last night. As far as cable
pinouts I would reccomend getting the pinout for your monitor and the output
port of the SGI. I don't know anything about the pinout of an Onyx but customer
support should be able to provide you with the necessary documents.

Brian

On Jan 13, 3:38pm, VR++at++onyx wrote:
> Subject: vga for PC-monitor
> Hi everbody !
>
> Are there anyone out there with experience from running a "ordinary"
PC-monitor
> from a iR-machine ? By ordinary I mean the analog, 15-pin, VGA-style
connector
> on the monitor. There is a cabling problem, taking the connector on the iR to
> the connector needed for PC, but most of all, what does the videosignal look
> like ? What settings in the ircombiner-tool is recommended ? We are mainly
> interested in the 800x600 resolution, but 600x480 could be interesting as
well.
>
> Any ideas or pointers to info is very appreciated ! Thanks !
>
> -- Dennis Saluaar, Volvo
>
> My email : dennis++at++vtd.volvo.se
>
> --
>
> AB Volvo, Technological Development _/_/_/_/
> Cognitive Ergonomics _/_/_/
> _/
> Phone : +46-31-595647
> Fax : +46-31-595415 "So many polygons,
> E-mail: vr_dev++at++vtd.volvo.se so little time..."
> =======================================================================
> List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>-- End of excerpt from VR++at++onyx

-- 
o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o-o


Brian Furtaw  (brian++at++sgi.com)	
VisSim  Technical  Consultant
12200-G  Plum  Orchard  Drive	Office:	(301)572-3293  Fax: (301)872-3293	
Silver Spring, Maryland 20904	OpenGL/ImageVision/OpenInventor/Performer
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:19 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.