Paul Rider (prider++at++airinc.com)
Tue, 31 Dec 1996 13:50:21 -0500
Here is my situation:
---------------------
-I'm doing the lights for a runway.
-I have a string of lights (aprox 90)that need to flash in sequence (I
think pfSequence is in order).
-Each light should flash twice a second(changes state every 1/4 second)
in sequence from their begining until the runway threshold.
Here is my problem:
-------------------
If I use a pfSequence to cycle through the lights by the time I get to
the third light, the first is ready to be turned on again. As far as I
know there is no way to specify this with pfSequence nodes. (Please
correct me if I'm wrong).
Here is my question(s):
--------------------
How can I get around this?
Do I need to create a whole mess of pfSequences?, is there
Here is your solution/suggestion: <grin> ;-)
----------------------
P.S.: The solution shouldn't be too costly as far as performance.
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:13 PDT