Re: Line width of line-geosets

New Message Reply Date view Thread view Subject view Author view

Daniela Rainer (rus3d++at++visvr1.rus.uni-stuttgart.de)
Mon, 16 Dec 1996 11:50:46 +0100 (MEZ)

>
> > I have a problem with geosets that contain lines:
> >
> > If I set the line width with pfGSetLineWidth of one geoset all other geosets
> > that contain lines are drawn with this line width.
> >
> > I use IRIX 6.2 and Performer 2.01 on a Crimson with RealityEngine I graphics.
>
> The state change in Performer is a lazy state change. If you don't specify
> how the state should be it won't change and thus be what ever was left
> by some other geometry. You have to specify for each geoset the relevant
> states, set them explicitly or let them inherit from the global state.
>
> Mario
>

Hi Mario,
I'm not sure if the line width is a state. It belongs to the geoset and not to the geostate. Do you think I have to specify a line width for each line geoset?

Thanks for your help,
Regards
Daniela

-- 
rainer++at++rus.uni-stuttgart.de
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:09 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.