Re: lynx make my impact reboot

New Message	Reply	Date view	Thread view	Subject view	Author view

Rob Jenkins (robj++at++quid)
Fri, 22 Nov 1996 10:25:01 -0800

Next message: BOCCARA Michael: "Mouse processing for 2 Pipewindows"
Previous message: Janet Estabridis: "Enabling & Disabling DCS node using multi-channels in a pipe"

On Nov 22, 4:57pm, Jim wrote:
> Subject: lynx make my impact reboot
> Hi :
> My Maximum IMPACT always reboot automatically when I
> run lynx at first booting. But the problem is dispear after
> relogin any username. I have tried to add 3 patches list
> and my IMPACT environment is as below. How come ?Any messages
> will be great!
>
> version1232792137 IRIX Execution Environment, 6.2
>
> Iris Audio Processor: version A2 revision 1.1.0
> 1 250 MHZ IP22 Processor
> FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
> CPU: MIPS R4400 Processor Chip Revision: 6.0
> On-board serial ports: 2
> On-board bi-directional parallel port
> Data cache size: 16 Kbytes
> Instruction cache size: 16 Kbytes
> Secondary unified instruction/data cache size: 2 Mbytes on Processor 0
> Main memory size: 128 Mbytes
> EISA bus: adapter 0
> Integral Ethernet: ec0, version 1
> Integral SCSI controller 1: Version WD33C93B, revision D
> Integral SCSI controller 0: Version WD33C93B, revision D
> Disk drive: unit 2 on SCSI controller 0
> Disk drive: unit 1 on SCSI controller 0
> Graphics board: Maximum Impact
>
> added patches
>
> I patchSG0001333 11/04/96 Patch SG0001333: Impact Graphics bug fix
> patch for 6.2
> I patchSG0001406 11/18/96 Patch SG0001406: X server patch for Irix
6.2
> I patchSG0001488 11/18/96 Patch SG0001488: 6.2 Kernel roll up
>

patch 1333 has been replaced by 1447 so I'd recommend you try that. If it's
still a problem then it would be best to log a support call with your local SGI
office.

Cheers
Rob

-- 
________________________________________________________________
Rob Jenkins mailto:robj++at++csd.sgi.com
Silicon Graphics, Mtn View, California, USA
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

Next message: BOCCARA Michael: "Mouse processing for 2 Pipewindows"
Previous message: Janet Estabridis: "Enabling & Disabling DCS node using multi-channels in a pipe"

New Message	Reply	Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:54:00 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.