Re: iR display modes

New Message Reply Date view Thread view Subject view Author view

Scott McMillan (scott++at++ht.com)
Mon, 16 Sep 1996 09:42:55 -0400 (EDT)

>
> William Sherman -Visualization wrote:
>
> > I'd like to make a .cmb (I guess) that gives me two 1024x768_96s
> > outputs. Actually, I'd like two outputs of the highest resolution
> > stereo I can get with my hardware (gfxinfo output below).

Me too. Actually I will settle for just ONE stereo channel that is NOT
640x480.

Henrik Tramberend wrote:

> I am currently trying to do the same thing. I used ircombine to
> configure two 1024x768_96s channels on each pipe after I learned that
> unfortunately two 1280x1024_120s channels per pipe are not possible
> due to bandwidth limitations.
>
> First thing I noticed was the image being blurry with some strange
> interlacing artefacts on one of our newer SGI monitors. The older
> monitor models I tried just showed a pitch black screen.

I set up the same 1024x768_96s (one channel though) and got the same blurry
output. I saw an 1120x840_96s.cmb file but there is an error in it, and
without a corresponding .vof file I don't know how to fix it.

scott

-- 
  Scott McMillan  |       HT Medical, Inc.      | Developing virtual environ-
   scott++at++ht.com   |      http://www.ht.com      | ment medical and surgical
 Ph: 301-984-3706 | 6001 Montrose Rd., Ste. 902 | simulations and surgery
Fax: 301-984-2104 |     Rockville, MD 20852     | simulation creation tools.
=======================================================================
List Archives, FAQ, FTP:  http://www.sgi.com/Technology/Performer/
            Submissions:  info-performer++at++sgi.com
        Admin. requests:  info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:53:32 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.