re: bus error

New Message Reply Date view Thread view Subject view Author view

Michael T. Jones (mtj++at++babar.asd.sgi.com)
Tue, 10 Sep 1996 06:49:01 -0700


Just glancing at the program Tawfek Mukhtar sent, I'd say the problem
is in the geoset attributes when the program is run in a multiprocessing
mode. If you run MP, then you need to allocate libpr elements and
component data (such as colors, normals, positions, and texture
coordinates) from the shared memory arena. The code you posted
has all these used from normal unshared global areas. This would
work if you added a pfMultiprocess(PFMP_APPCULLDRAW) before config
to force the issue; but better is to allocate the arrays in shared
memory and then copy the values from the current arrays.

michael

Be seeing you, Phone:415.933.1455 Fax:415.965.2658 M/S:8U-590
Michael T. Jones Silicon Graphics, Advanced Systems Division
mtj++at++sgi.com 2011 N. Shoreline Blvd., Mtn. View, CA 94039-7311
                    "Du musst Amboss oder Hammer sein" -- Goethe
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com


New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:53:31 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.