Steve Baker (steve++at++mred.bgm.link.com)
Mon, 26 Aug 96 17:24:59 -0500
I'm seeing *really* poor angular noise levels - when the detector
and emitter are around two feet apart I see around 5 degrees of noise!
Is this typical of the device - or is there something I'm not setting
up properly?
When the emitter and detector are a couple of inches apart, the
noise drops down to almost zero - so I'm fairly sure I'm reading
it correctly.
Steve Baker 817-323-1361 (Vox-Lab)
Hughes Training Inc. 817-695-8776 (Vox-Office/vMail)
2200 Arlington Downs Road 817-695-4028 (Fax)
Arlington, Texas. TX 76005-6171 steve++at++mred.bgm.link.com (eMail)
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:53:25 PDT