Error in Channel offsets

New Message Reply Date view Thread view Subject view Author view

wasileskib++at++adadv1.mdc.com
Fri, 26 Jul 1996 12:34:38 -0500

I have an application which in which I am using
3 viewing channels, each with a 72 degree horiz.
FOV. I have set the channel group such that the
center channel is the master channel and the
left and right are attached channels. As long
as the channel offsets are changed in yaw, there
consistant alignment from channel to channel;
however, when the left and right channels are
rotated 90 degrees in pitch (left +90.0f and
right -90.0f) the 3 channels no longer give
a continous FOV in the horizontal direction.
There seems to be about a 5-10 degree lag
between channels once the left and right channel
offsets are rotated 90.0 degrees. Can anyone
verify this as a problem?

- Bryan Wasileski
  McDonnell Douglas Training Systems
  wasileskib++at++adadv1.mdc.com
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com

=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer/
            Submissions: info-performer++at++sgi.com
        Admin. requests: info-performer-request++at++sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:53:14 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.