ceti (ceti++at++worldnet.net)
Tue, 21 May 1996 09:51:56 +0100
I have make the RTC run with PC VGA, Hewlett Packard Apollo 300 and 700
series, Indigo 2, Indigo, Indy, 320 VGX, Onyx Re2.
Having one RTC for several machine is is cheaper than having a dedicated
video card in each.
One is available right now in france and shipping is possible, the other
should be available on 4th of August in Savannah' at the end of the Olympics
Games.
/--------------------------------------------------------------------/
abstracts of the operators guide
the RTC is areal Time system for the conversion of images from high
resolution RGB format ( separate red green and blue video such as is used by
computer graphics system) into NTSC format.
This features include :
Real Time conversion
all digital conversion system
instantly configurable for any input resolution
accepts up to 3 video inputs with separate config for each
pan and zoom capability ( SO YOU CAN PICK ALL YOUR MONITOR OR JUST A
RESIZABLE AREA )
adjustable softness
flicker elimination
all digital NTSC encoder
oversampling on all video output
Input source:
R red
G green
B blue
HD horizontal sync or composite sync
VD vertcal Sync
Sync formats
R+G+B composite sync on green (most of monitors)
R+G+B+HD composite sync
R+G+B+HD+VD separate sync
INPUT
Impedance 75 or 100K
Horizontal Timing NTSC Fh 19.4 to 89 Khz
Vertical Timing Fv limited only by Fh and total lines
maximum pf 1024 active images lines
OUTPUT
RGB Out Red Green Blue and composite sync outputs
Selection of separate sync, Sync on Green,
or Sync on Red, Green and Blue
Betacam component output single 75 ohm with Y,R-Y,B-Y on separate BNC
S VHS output single ouput with standard svhs connector
Adjustement range:
Sync to subcarrier phase (Sch) from 0 to 360 with 2040 discrete steps
Internal sync to Ref sync -8.8 to +9.8 micro sec in 70 nano sec steps
Output carrier to 0 to 192 degrees with 255 discrete steps
Ref to sub carrier 0 or 180 phase shift
test pattern SMPTE, EIA bars, Black, Full Bars
Remote control
two ports, one serial RS 232, one RS 422
One front panel allows the user to change each parameters of the configuration.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
< _/_/ _/ _/_/_/ _/ _/ _/_/_/ _/_/_/ _/_/_/ >
< _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ >
< _/ _/ _/ _/ _/ _/ _/ _/_/_/ _/ _/ >
< _/ _/ _/ _/ _/ _/ _/ _/ _/_/_/ >
< _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ >
< _/_/ _/_/_/ _/_/_/ _/ _/_/_/ _/_/_/ _/ _/ >
< >
< BILLARD Olivier - Ingeneer R&D ++at++ C&I Software >
< 1 avenue de la mer - 44380 PORNICHET - FRANCE >
< Tel: +33 40 11 68 72 Fax: +33 140 61 68 14 >
< Email: ceti++at++worldnet.net >
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
=======================================================================
List Archives, FAQ, FTP: http://www.sgi.com/Technology/Performer.html
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:52:54 PDT