Kornel Szabo (szabo++at++ifi.unizh.ch)
Tue, 29 Aug 1995 17:02:19 +0200
after initiating the commands
setenv DISPLAY :0.0
/usr/gfx/stopgfx
setmon -S 4++at++640x486_30i
I get the following message:
---------------------------------------------------------
Reminder: This program must be run on an sgi with
a mco installed and the DISPLAY env var set to :0.0
This program changes to mco modes (def is 4NTSCs).
For a different mode, enter it on the command line.
gl_init_scrntab() can`t find any valid X screens (:o.o)
There is no longer output to the console, output
is now directed to the MCO in 4++at++640x486_30i mode.
Please note, it can take a minute or two for
the graphics and X server to start back up.
---------------------------------------------------------
Can anyone give me a hint, what to check to fix this problem?
(I already checke the RE vof files: they are all there)
Here is an ls of the (I think) relevant dirs:
/usr/gfx/ucode/RE/vs2/vof/2rm/:
1++at++1280x1024_60/ 2++at++640x480_60/ 4++at++640x480_60/
1++at++640x486_30i/ 2++at++640x480_60+1++at++1280x1024_60/ 4++at++640x486_30i/
2++at++1025x768_60/ 2++at++640x486_30i/ 4++at++640x640_60/
2++at++1200x900_72/ 2++at++960x680_60/ 4++at++720x544_60/
2++at++1280_twovof/ 3++at++640x486_30i/ 4++at++960x620_60/
2++at++1280x1024_50/ 3++at++800x600_60/ 6++at++640x480_60/
2++at++1280x1024_60/ 3++at++850x850_60/ 6++at++640x486_30i/
2++at++640x480_180q/ 3++at++960x680_60/ 6++at++745x224_60/
/usr/gfx/ucode/RE/vx2/vof/:
1280x1024_60/ 1280x960_180qi/ 640x480_180q/ 640x480_60/
Thanks in advance
Kornel
This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:51:50 PDT