Re: Performer with FAKESPACE'S BOOM3C...

New Message	Reply	Date view	Thread view	Subject view	Author view

Mark Ferneau (Mark_Ferneau++at++ssw.ssd.sterling.com)
Fri, 17 Feb 1995 13:24:04 PST

Next message: Beaver, Jim: "frame rate control with IRIX 5.3 revisited"
Previous message: Michael Jones: "Re: OpenPerformer"
In reply to: Smith, Jeff W.: "OpenPerformer"

The Boom2C's video format is like the CrystalEyes setup. With the 2C
you may have to redraw the scene FOUR times to get color and stereo:
        Left Eye Blue
        Left Eye Red
        Right Eye Blue
        Right Eye Red
The 2C is NOT a full color device, the 3C is.

The Boom3C takes separate field-sequential video inputs. You have to
position windows differently based upon your graphics configuration. You'll
need either an MCO or a dual-pipe RE system to achieve stereo for the Boom3C.

>You might want to call Fakespace. They were talking about writing a performer
>driver for the BOOM. You at least need the optical parameters of the CRT's:
>image distance, size, and separation.

Ian MacDowell at Fakespace (415) 688-1940 is the best contact for this
information. I know that he has done some work with Performer.

--Mark

Next message: Beaver, Jim: "frame rate control with IRIX 5.3 revisited"
Previous message: Michael Jones: "Re: OpenPerformer"
In reply to: Smith, Jeff W.: "OpenPerformer"

New Message	Reply	Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:50:58 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.