Re: Framelocking on realityII and sirius ...

New Message Reply Date view Thread view Subject view Author view

JAVIER CASTELLAR (javier++at++mar.madrid.sgi.com)
Wed, 4 Jan 1995 18:24:58 -0800


Hi,

        You have two options: work with fields or work with frames.

A) FRAMELOCKING:

        In order to get it framelocked we have four dedicated vofs for the DG2
(it means: Video Output Formats for the Reality Engine graphics output (DG2)).

1280x1024_50f (PAL) It suports field swapbuffering on the traslation from the
                        graphics frame buffer (RE2) up to the Sirius field
buffers.
                It does as well the frame locking. (I LIKE IT)

1280x1024_25f (PAL) It support only complete frame updates on the translation
                        from the gfx frame buffer (RE2) up to the pairs of
field buffers (Sirius)

1280x1024_60f and 1280x1024_30f are the couple of vofs for NTSC

        You can use "setmon ..." to use it. Please refer to the on line manual
pages. See before the example at (C)

        Then you have framelocked the Reality Engine swapbuffers to the Sirius
but you need to GENLOCK the video signals.

B) GENLOCKING:

One possible aproach is:

g.o.: Genlock out
g.i.: Genlock in

Sync pattern -------> Video Source ---->Sirius------>Reality Engine
           g.o. g.i. g.o. g.i g.o. g.i. (DG2) g.o.
terminated

        In order to enable the genlocking in the RealityEngine you have to use
the -g option when you use "setmon". Be careful, if you don't receive genlock
in the graphics display will not retrace: use a text terminal on a serial port
or a network rlogin to rearrange it.

C) SETTING UP for FRAMELOCKING + GENLOCKING for PAL:

Reality Engine:

su
setenv DISPLAY :0.0
/usr/gfx/setmon -g 1280x1024_50f
(if you wish to make it permanent after reboot)

or

/usr/gfx/setmon -n -g 1280x1024_50f (if you wish to make some trials)

Sirius:

use the video control panel (vcp)

vcp

and select the proper genlock option using the nice interface (house)

D) FINAL POINTERS:

You should have the documentation. On 5.3 it is online in Insight.

Hope to help.

-Javier

-- 
********************************************************************
*  Javier Castellar     * Email:	javier++at++madrid.sgi.com      *
*  Systems Engineer	* Vmail:	x59665                     *
*     	   Gfx guru     * Phone:	++34-1-4429077             *
* Silicon Graphics Spain* Fax:		++34-1-4420150             *
********************************************************************
  Nobody said that the life was a fair play
				Javier Castellar

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:50:49 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.