Problems with 1.2 on Indigo2 Extreme/XL

New Message Reply Date view Thread view Subject view Author view

David Pratt (pratt++at++medusa.cs.nps.navy.mil)
Sun, 21 Aug 1994 22:15:30 -0700

Good morning, I hope you had a better weekend then I did.

When I run perfly on my Indigo2 Extreme/XL (Two pipeline Indigo2, see the
hinv/uname below) on the Extreme pipline it opens up two full screen windows.
The "Welcome to Performer" screen appears, flashes black, then the "Welcome to
Performer" screen comes back up. The first one does not have the gui widgets,
the second one is ok. In order to get to the good one, I have to push (ALT-F3)
the other one to the back. Suggestions?

I can live with that, but the real problem is on the local code. On all the
machines, but this one, it comes up ok. On mine, it does not display the lit
terrain. I know the terrain is there, when I turn on texturing I can see it. I
would feel better if the two problems were the same.

I have recompiled the code to make sure it was not that. Any Ideas?

Dave

Here are the specifics of my system:
medusa:/usr/work/pratt
                                                         % hinv
1 150 MHZ IP22 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4400 Processor Chip Revision: 5.0
On-board serial ports: 2
On-board bi-directional parallel port
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 96 Mbytes
EISA bus: adapter 0
Iris Audio Processor: version A2 revision 1.1.0
Integral Ethernet: ec0, version 1
Disk drive: unit 7 on SCSI controller 1
Disk drive: unit 6 on SCSI controller 1
CDROM: unit 4 on SCSI controller 1
Tape drive: unit 3 on SCSI controller 1: DAT
Integral SCSI controller 1: Version WD33C93B, revision D
Disk drive / removable media: unit 2 on SCSI controller 0
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 0: Version WD33C93B, revision D
Graphics board: XL
Graphics board: GU1-Extreme

medusa:/usr/work/pratt
                                                         % uname -a
IRIX medusa 5.2 02282016 IP22 mips

medusa:/usr/work/pratt
                                                         % versions
performer_dev
I = Installed, R = Removed

   Name Date Description

I performer_dev 08/08/94 IRIS Performer1.2/Irix5 Development
                                    Software
I performer_dev.man 08/08/94 IRIS Performer1.2/Irix5 Documentation
I performer_dev.man.relnotes 08/08/94 IRIS Performer1.2/Irix5 Release Notes
I performer_dev.src 08/08/94 IRIS Performer1.2/Irix5 Sample Code
I performer_dev.src.pguide 08/08/94 IRIS Performer1.2/Irix5 Programmers
                                    Guide Examples
I performer_dev.src.sample 08/08/94 IRIS Performer1.2/Irix5 Sample
                                    Application
I performer_dev.sw 08/08/94 IRIS Performer1.2/Irix5 Development
                                    Environment
I performer_dev.sw.debug 08/08/94 IRIS Performer1.2/Irix5 Debug Libraries
I performer_dev.sw.performer 08/08/94 IRIS Performer1.2/Irix5 Headers
I performer_dev.sw.pfdwb 08/08/94 IRIS Performer1.2/Irix5 Sample DWB File
                                    Conversion Library
I performer_dev.sw.pfflt 08/08/94 IRIS Performer1.2/Irix5 Sample Flight
                                    File Conversion Library
I performer_dev.sw.pfsgi 08/08/94 IRIS Performer1.2/Irix5 Sample SGI File
                                    Conversion Library
I performer_dev.sw.pfutil 08/08/94 IRIS Performer1.2/Irix5 Utility Library
I performer_dev.sw.static 08/08/94 IRIS Performer1.2/Irix5 Non-Shared
                                    Libraries

medusa:/usr/work/pratt
                                                         %

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2.0b2 on Mon Aug 10 1998 - 17:50:29 PDT

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.