From: Steve Satterfield (steve++at++nist.gov)
Date: 09/01/2005 07:37:56
On our 4 pipe Onyx where 3 pipes are configured as one X server, I used
perfly -C 1,0,2
to make the perfly menus show up on the desired screen. See the perfly man
page. You might try the -C option.
-Steve
On Thu, 1 Sep 2005, Chris Want wrote:
> > From: Simon Su <ssu8888++at++yahoo.com>
> > Date: Tue, 30 Aug 2005 09:17:25 -0700 (PDT)
> > Subject: [info-performer] Question on SGI Prism and Performer 3.2
> >
> > Hello,
> >
> > We have just setup our Prism and when we ran
> > Performer, for some reason, the menu GUI is not
> > showing on Perfly. What could the reason be? Has
> > anyone experienced this before?
>
> Hi Simon,
>
> I think I have seen this before (here, menu just draws
> grey). This seems to happen when we use our multipipe system
> with only one pipe. The workaround was to use -M 0
> for single pipe mode. I assume it is trying to draw the
> menu with one of the other pipes.
>
> Hope this helps!
>
> Chris
>
> -----------------------------------------------------------------------
> List Archives, Info, FAQ: http://www.sgi.com/software/performer/
> Open Development Project: http://oss.sgi.com/projects/performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
> -----------------------------------------------------------------------
>
>
>
This archive was generated by hypermail 2b29 : Thu Sep 01 2005 - 07:38:05 PDT