From: faculaganymede (faculaganymede++at++yahoo.com)
Date: 03/11/2004 18:21:06
pfExperts,
I have a frame rate and video format related question.
I've created a video format combination in Ircombine
that uses two channels, as follows:
Chan-0:
connects to CRT monitor
vfo: 512x512_100
Chan-1:
connects to an oscilloscope
vfo: 512x512_200
Below is what I observed when I ran my Performer
application (with framerate set to 200Hz) in single
and multi processing modes:
Multi process mode, I get 200Hz from pfGetFrameRate
and 200Hz on the Oscilloscope
Single process mode, I get 100Hz from pfGetFrameRate
and 200Hz on the Oscilloscope
Can someone explain to me why in single process mode I
only get 100Hz from pfGetFrameRate, yet the scope
tells otherwise?
I am working on an Onyx 300, IR 3, with 2 pipes, 8 CPUs.
=====
Thanks,
faculaganymede
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com
This archive was generated by hypermail 2b29 : Thu Mar 11 2004 - 18:22:19 PST