[info-performer] HowTo? Performer/Linux on 4 screens (Quadro4 400 NVS)

From: Michael Logan (mlogan++at++mail.arc.nasa.gov)
Date: 06/11/2003 14:40:44

• Next message: Pete Woodward Woodward: "[info-performer] unresolved refs on redhat 7.3 with performer 3.0.1"
• Previous message: Devrim Erdem: "Re: [info-performer] do sgi and performer support XWin?"
• Next in thread: Juan Pablo Gómez: "RE: [info-performer] HowTo? Performer/Linux on 4 screens (Quadro4 400 NVS)"
• Reply: Juan Pablo Gómez: "RE: [info-performer] HowTo? Performer/Linux on 4 screens (Quadro4 400 NVS)"

So, my group has been experimenting with various XF86Config files to try
 and get 4 screens working on this PCI board.

Anyone have any experience with this?

Since this board has TWO Quadro chips on it, there are 2 PCI devices.
We got TwinView working on each device so there are 4 screens working
 now, but each pair of screens is :0.0 and :0.1. Is that good or bad?

Xinerama seems to be only for X-windows, not OpenGL windows.
Maybe it is supposed to work and we did it incorrectly.

Any ideas are welcome...

thanks,

ml

-- 
Michael Logan  Task Lead, Visual Cueing & Simulation, (650)-604-4494 
QSS Group, Inc. / NASA Ames Research Center
MS 262-6,Moffett Field,CA, 94035
private: vonlogan++at++rcn.com, http://users.rcn.com/vonlogan/index.htm

• Next message: Pete Woodward Woodward: "[info-performer] unresolved refs on redhat 7.3 with performer 3.0.1"
• Previous message: Devrim Erdem: "Re: [info-performer] do sgi and performer support XWin?"
• Next in thread: Juan Pablo Gómez: "RE: [info-performer] HowTo? Performer/Linux on 4 screens (Quadro4 400 NVS)"
• Reply: Juan Pablo Gómez: "RE: [info-performer] HowTo? Performer/Linux on 4 screens (Quadro4 400 NVS)"

This archive was generated by hypermail 2b29 : Wed Jun 11 2003 - 14:48:58 PDT