From: V. Sundararajan (sundar++at++sgi.com)
Date: 04/17/2003 10:14:05
Hello,
A customer has his aircraft data created using Catia and has converted to
Inventor and pfb formats. the data is spread over 1025 files and the approx
number of triangles is about 500 million.
The customer has an Onyx 3200 with IR3 graphics (8GB Memory and 16GB Swap),
tried to load with perfly_n32 and was not able to load the whole data into
memory. While loading perfly gave the error to increase PFSHAREDSIZE and
PFSEMASIZE. The customer set the respective values to 2,000,000,000 bytes
and 1,000,000 bytes (default was 262144). Even then perfly did not load up
all the data and asked for an increase of PFSHAREDSIZE from 976,562K. It
did not allocate a size of 2,000,000,000 bytes.
The customer was able to load his data with perfly_n64. He was able to load
the data and view it using perfly, but the camera operations were
comparatively slow.
Could anyone throw light on what the performer environment variable setting
should be. There is also a variable to set the shared memory base.
Many Thanks in advance,
Regards,
Sundar
This archive was generated by hypermail 2b29 : Thu Apr 17 2003 - 10:31:22 PDT