RE: GLX problem from SGI to Linux

New Message Reply Date view Thread view Subject view Author view

From: Dorosky, Christopher G (christopher.g.dorosky++at++lmco.com)
Date: 01/09/2002 10:11:10


I have had weird problems like this for two different reasons, even from SGI
to SGI.

First, if the screen resolutions are not the same, I have had problems like
yours before.
Also, with 6.5.14, SGI seems to have completely redone all of the X stuff,
which causes me grief. There is mention of this in the release notes.

Christopher Dorosky
Lead Electronic Systems Engineer - Real Time Simulation
Lockheed Martin Missiles and Fire Control - Dallas
christopher.g.dorosky++at++lmco.com
972-603-2349

-----Original Message-----
From: Robert Nitti [mailto:rnitti++at++cae.com]
Sent: Tuesday, January 08, 2002 7:15 AM
To: 'info-performer++at++sgi.com'
Subject: GLX problem from SGI to Linux

Hi,
 
When I try to run an OpenGL app from an SGI to a Linux box (via "setenv
DISPLAY mylinuxmachine:0"), i get the following error below. I did an
"xhost +" on the Linux side to accept the X commands. Can anyone tell me
why this is?
 

X Error of failed request: GLXUnsupportedPrivateRequest
  Major opcode of failed request: 142 (GLX)
  Minor opcode of failed request: 17 (X_GLXVendorPrivateWithReply)
  Serial number of failed request: 824
  Current serial number in output stream: 824
 
 
 
When I do a "setenv DISPLAY mylinuxmachine:0" and type "glxinfo" i also get
the following:

display: mylinuxmachine:0
X Error of failed request: GLXUnsupportedPrivateRequest
  Major opcode of failed request: 142 (GLX)
  Minor opcode of failed request: 17 (X_GLXVendorPrivateWithReply)
  Serial number of failed request: 16
  Current serial number in output stream: 16
 
 
My SGI is running 6.5.14f. My Linux box is running RH 7.0 with Mesa 3.4-13
with an Nvidia card (the Mesa GL libs [libGL, libGLcore] were replaced by
the Nvidia ones).
 
Thanx
Robert

 
-----------------------------------------------------------------------
   List Archives, Info, FAQ: http://www.sgi.com/software/performer/
   Open Development Project: http://oss.sgi.com/projects/performer/
                Submissions: info-performer++at++sgi.com
            Admin. requests: info-performer-request++at++sgi.com
-----------------------------------------------------------------------


New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Wed Jan 09 2002 - 10:09:08 PST

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.