From: MLM Veraart (veraart++at++fel.tno.nl)
Date: 01/09/2002 07:27:25
Hello,
When you 'setenv DISPLAY' some SGI applications want a 4DWM window
manager running
on the target machine. I think Performer is such an application.
Mario
Robert Nitti wrote:
>
> Hi,
>
> When I try to run an OpenGL app from an SGI to a Linux box (via "setenv
> DISPLAY mylinuxmachine:0"), i get the following error below. I did an
> "xhost +" on the Linux side to accept the X commands. Can anyone tell me
> why this is?
>
>
> X Error of failed request: GLXUnsupportedPrivateRequest
> Major opcode of failed request: 142 (GLX)
> Minor opcode of failed request: 17 (X_GLXVendorPrivateWithReply)
> Serial number of failed request: 824
> Current serial number in output stream: 824
>
>
>
> When I do a "setenv DISPLAY mylinuxmachine:0" and type "glxinfo" i also get
> the following:
>
> display: mylinuxmachine:0
> X Error of failed request: GLXUnsupportedPrivateRequest
> Major opcode of failed request: 142 (GLX)
> Minor opcode of failed request: 17 (X_GLXVendorPrivateWithReply)
> Serial number of failed request: 16
> Current serial number in output stream: 16
>
>
> My SGI is running 6.5.14f. My Linux box is running RH 7.0 with Mesa 3.4-13
> with an Nvidia card (the Mesa GL libs [libGL, libGLcore] were replaced by
> the Nvidia ones).
>
> Thanx
> Robert
>
>
> -----------------------------------------------------------------------
> List Archives, Info, FAQ: http://www.sgi.com/software/performer/
> Open Development Project: http://oss.sgi.com/projects/performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
> -----------------------------------------------------------------------
This archive was generated by hypermail 2b29 : Wed Jan 09 2002 - 07:25:33 PST