From: ihawkes2++at++csc.com.au
Date: 12/19/2000 14:53:32
Hi Tom,
The "-y flt,20,1" option tells perfly to set the flt loader converter mode
number 20 to a value of 1. The flt loader modes are described in
/usr/share/Performer/src/lib/libpfdb/libpfflt/README.FLT.R15_3 (on our
system at least). I've attached an excerpt for you below. Another less
descriptive place to look is the flt loader header file in
/usr/include/Performer/pfdb/pfflt.h
Regards,
Ian Hawkes
(See attached file: README.FLT.R15_3.excerpt)
"Braun, Tom" <tom.braun++at++lmco.com> on 19/12/2000 08:02:42
To: "Performer (E-mail)" <info-performer++at++sgi.com>
cc:
Subject: pfdConverterMode
I am loading clipmap textured terrain into perfly. From reading old
performer mailing list archives, I found that I need to use the optional
parameter of "perfly -y flt,20,1" in order to activate the texgen needed
for
correct clipcenter placement. Does anyone know where I can find an
explanation for the mode and index parameters of "20 and 1"? The perfly
code uses the call pfdConverterMode() which "allows the user to access and
alter the modes, attributes and values of specific loaders. These modes,
attributes and values are defined inside each individual loader."
There doesn't appear to be any available documentation for specific mode
and
index values.
Any help would be appreciated.
-----------------------------------------------------------------------
List Archives, FAQ, FTP: http://www.sgi.com/software/performer/
Open Development Project: http://oss.sgi.com/projects/performer/
Submissions: info-performer++at++sgi.com
Admin. requests: info-performer-request++at++sgi.com
This archive was generated by hypermail 2b29 : Tue Dec 19 2000 - 17:45:16 PST