From: Tom Flynn (flynnt++at++cthulhu.engr.sgi.com)
Date: 10/10/2000 02:24:26
Greetings,
Can you even run _any_ OpenGL apps? For example:
/usr/X11R6/lib/xscreensaver/sproingies
Or the little modified glutdino program I put on my reality web page
(http://reality.sgi.com/flynnt/).
If you can't run either one of those, then your problem doesn't lie with
Performer and you'll probably need to contact your OpenGL vendor (NVidia,
RedHat, etc).
Sorry. Good luck,
tom
On Mon, 9 Oct 2000, bob holicky wrote:
> Hi,
>
> started out w/ the seg fault using mesa from default
> installation w/ nvidia hardware.
>
> > From: Tom Flynn
> >
> > Please make sure that you are definately using
> > NVidia's driver
> > and not the Mesa that was installed by RedHat 7. In
> > fact, just to be
> > sure, I would remove the libGL.* libraries (don't
> > remove libGLU) and
> > re-install NVidia's GLX rpm and make sure that only
> > the libGL's that are
> > listed in NVidia's rpm are the only ones installed
> > on the system.
>
> I was experiencing the same problems. I did the
> above, installing the nvidia 9.5 kernel and 9.5
> glx rpm's.
>
> Using a geforce 256.
>
> I now crash the X server trying to run perfly.
> Any ideas?
>
> thank you
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
> http://photos.yahoo.com/
> -----------------------------------------------------------------------
> List Archives, FAQ, FTP: http://www.sgi.com/software/performer/
> Submissions: info-performer++at++sgi.com
> Admin. requests: info-performer-request++at++sgi.com
>
-- "Mongooses are famous for their snake-fighting ability, and are almost always victorious because of their speed, agility, and timing and also because of their thick coat."
This archive was generated by hypermail 2b29 : Tue Oct 10 2000 - 02:26:19 PDT