From: Gary Quinn (Gary++at++tees.ac.uk)
Date: 03/24/2000 06:59:30
Thanks for your reply Angus.
I have specified a composite sync on pipe 0.
I'm pretty sure the connections are ok, with
the exception of possible the 13w3 to 13w3+2bnc,
because I had gfxinfo reporting a genlock before
the dramatic pipe crash. That was using green
for a sync instead of h or v.
I havn't been able to get a slot on the machine
yet, to try teeing off from green onto the genlock
on pipe 1.
Do you think this is a valid thing to try ? Apart
from this, I've tried everything that's been
suggested, without success.
Cheers,
Gary.
>
> You need nothing on pipe 0 genlock connector.
>
> Make sure you specify a composite sync on pipe 0.
>
> It may be that you have a problem with your connector, or the DG's
>
> To test the DG's try genlocking some other combination of two pipes.
>
> CHeers,ANgus.
>
>> snip snip
> > I think my next attempt - when the machine is free for
> > an hour, will be to tee off the green from channel zero
> > onto the genlock in on pipe 1.
> >
This archive was generated by hypermail 2b29 : Fri Mar 24 2000 - 10:02:29 PST