Re: AW: 3 Pipe Onyx Genlock

New Message Reply Date view Thread view Subject view Author view

From: Eric Kunze (ekunze++at++yacko.engr.sgi.com)
Date: 03/21/2000 10:20:34

Hi Oliver,

  You can look at http://toolbox.sgi.com/toolbox/documents/HiEndGfx/genlockconn
.html for some information on genlocking Onyxs. (You'll need sgi developers
program access which is free)

  More details about the settings in ircombine can be found in the Ircombine
users guide, available at: http://techpubs.sgi.com/library/tpl/cgi-bin/browse.c
gi?coll=0650&db=bks&cmd=toc&pth=/SGI_Admin/Combiner_UG

  Vfc (Video Format Compiler) is a separate issue, and shouldn't be needed
when setting up genlock. It is only needed when you are creating your own
formats.

Eric

> Hi Allan,
>
> Can you please explain the SMOC a little bit in deepth? We have genlock
> problems (may be caused by SMOC) with a 3 pipe (an up) machine and do not
> have very good explantion right now about all the influences from:
>
> * cabeling
> * ircombine
> * and vfc
>
> The PFCHAN_SWAPBUFFERS is activated.
>
> Cheeers
> Oliver
>
> ------------------------------------------
> Dr.-Ing. Oliver H. Riedel
> Director Virtual Reality
> CENIT AG Systemhaus
> o.riedel++at++cenit.de
> phone +49 (0)711 780 73 349
> fax +49 (0)711 780 73 649
> Schulze-Delitzsch-Strasse 50
> D-70565 Stuttgart/Germany
> 

-- 
Eric Kunze
ekunze++at++engr.sgi.com

New Message Reply Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue Mar 21 2000 - 10:20:38 PST

This message has been cleansed for anti-spam protection. Replace '++at++' in any mail addresses with the '@' symbol.