From: Allan Schaffer (allan++at++sgi.com)
Date: 02/15/2000 15:12:29
Hard to say -- RealityEngine error messages didn't tend to be
specific enough to target exact causes. In roughly 80% of the cases
of this error I came across it was caused by a faulty GE board.
Another 19% happened when an IRIX upgrade went awry, and the
remaining 1% were software bugs [mostly eventually fixed in IRIX].
[I don't recognize these particular error values dumped from the
boards as anything 'known about' -- perhaps someone else will]
If you have a spare GE around to try swapping I'd suggest that.
Otherwise, this is a task for tech support..
Allan
On Feb 15, 3:21pm, Jorge Valencia Loera wrote:
> We have just updated our hardware and added some RE2 boards, RM4s, memory &
> CPUs to some Onyx/RE2 computers and since the HW upgrade from time to time
> we have the following error message followed by a death of the xdm:
>
> Anybody has an idea of what is going on?
> Could it be bad hardware?
>
> We are running IRIX 6.5.5m and 6.5.6m
>
> THANK YOU
>
> And sorry for the non-performer question
>
> **********************************************************************
>
> WARNING: RE pipe 0: lightweight deactivation timed out
> FIFO Count == 0x0
> pipe#0: RM count == 4 GE count == 12
> TP AP IA I0 I1 I2 I3 I4 I5 I6 I7 I8 I9 Ia Ib Ic Id Ie If O0 O1 O2 O3
> expd 00 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f
> RM0: 00 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 00 00 00 00
> RM1: 00 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 00 00 00 00
> RM2: 00 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 00 00 00 00
> RM3: 00 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 1f 00 00 00 00
> CP: HOST*: DATA=0x359 WE_L=1 TAG=0 GERDY_L=000000000000 RMRDY=0000 GPISRC
> WE_L=1 ACT_L=1
> GEF[0..11]: GERDY_L=000000000000 GRANTIN_L=111111111111 CPREQ_L=111111111111
> GE0 0 0 200 PB_HOLD
> GE1 ffffffffca00420d 3340e885 257 PB_HOLD
> GE2 8d01108 3492 300 GEOWN PB_HOLD
> GE3 30318828 ffffffffd0010050 202 PB_HOLD
> GE4 1178884 1816480a 288 PB_HOLD
> GE5 2000 40 200 PB_HOLD
> GE6 0 0 200 PB_HOLD
> GE7 20004008 204800 280 PB_HOLD
> GE8 0 0 200 PB_HOLD
> GE9 ffffffff
>
> XIO: fatal IO error 131 (Connection reset by peer) on X server ":0.0"
> after 327 requests (327 known processed) with 0 events remaining.
> 4Dwm: I/O error on display:: :0.0
>
> [ESP System Information Notification]:"WARNING: RE pipe 0: lightweight
> deactivation timed out"
> RE pipe 0: GE0: Reality GE running...(sherwood-root 9910012055 SS=0x8000
> HS=0x30)
-- Allan Schaffer allan++at++sgi.com Silicon Graphics http://reality.sgi.com/allan
This archive was generated by hypermail 2b29 : Tue Feb 15 2000 - 15:12:33 PST