Fix few typos/thinkos in ipw, remove ugly macro (it is commented
around, anyway), and fix types passed to pci_set_power_state.
--- middle-mm//drivers/net/wireless/ipw2100.c 2005-06-08 16:15:23.000000000
+0200
+++ linux-mm/drivers/net/wireless/ipw2100.c 2005-06-08 16:16:27.000000000
+0200
@@ -916,7 +916,7 @@
}
/*********************************************************************
- Procedure : ipw2100_ipw2100_download_firmware
+ Procedure : ipw2100_download_firmware
Purpose : Initiaze adapter after power on.
The sequence is:
1. assert s/w reset first!
@@ -1150,7 +1150,6 @@
*/
static int ipw2100_start_adapter(struct ipw2100_priv *priv)
{
-#define IPW_WAIT_FW_INIT_COMPLETE_DELAY (40 * HZ / 1000)
int i;
u32 inta, inta_mask, gpio;
@@ -1185,7 +1184,7 @@
i = 5000;
do {
set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(IPW_WAIT_FW_INIT_COMPLETE_DELAY);
+ schedule_timeout(40 * HZ / 1000);
/* Todo... wait for sync command ... */
read_register(priv->net_dev, IPW_REG_INTA, &inta);
@@ -1641,7 +1640,7 @@
} else
priv->status |= STATUS_POWERED;
- /* Load the firmeware, start the clocks, etc. */
+ /* Load the firmware, start the clocks, etc. */
if (ipw2100_start_adapter(priv)) {
printk(KERN_ERR DRV_NAME ": %s: Failed to start the
firmware.\n",
priv->net_dev->name);
@@ -5679,7 +5678,7 @@
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
- pci_set_power_state(pci_dev, 0);
+ pci_set_power_state(pci_dev, PCI_D0);
if (!ipw2100_hw_is_adapter_in_system(dev)) {
printk(KERN_WARNING DRV_NAME
@@ -7206,7 +7205,7 @@
ipw2100_wx_set_wap, /* SIOCSIWAP */
ipw2100_wx_get_wap, /* SIOCGIWAP */
NULL, /* -- hole -- */
- NULL, /* SIOCGIWAPLIST -- depricated */
+ NULL, /* SIOCGIWAPLIST -- deprecated */
ipw2100_wx_set_scan, /* SIOCSIWSCAN */
ipw2100_wx_get_scan, /* SIOCGIWSCAN */
ipw2100_wx_set_essid, /* SIOCSIWESSID */
|